Network-Connected Smoke Detector with Lithium Batteries

24,00 

A compact gas detector that will alert you to high concentrations of smoke. It protects against suffocation from toxic gases caused by smoke from a fire. It features an RF module that enables network connectivity between all detectors, enhancing your safety.

In stock

SKU: JKD-518-R-EN Category: Tags: , ,
Description

The JKD-518-R is equipped with a smoke sensor to alert you to smoke, which may be caused by a fire and could be life-threatening. It uses lithium batteries for maximum convenience and longevity.

With network connectivity, this detector provides a high level of protection by linking multiple devices for faster notification in case of danger.

Key Features of the JKD-518-R

  • Network Connectivity: Synchronizes alarms across all detectors in the system
  • Photoelectric sensor: Reliable and certified to BDS/EN/ISO 14604
  • Modern design and compact size
  • Power Supply: Operates on 2 CR123A lithium batteries (lifespan: 7–10 years)
  • Alarm: Audible and visual alarms

Where should you use a smoke detector?

  • In residential properties, including houses, apartments, and condominiums heated with wood and coal. Detectors should be installed near sleeping areas, as fires often start while people are asleep.
  • Other rooms where fuel-burning appliances are used, such as furnaces, boilers, or water heaters.  Detectors should be placed near these appliances to ensure nothing catches fire in the room.
  • Campers, RVs, and yachts — Smoke detectors are essential in campers, RVs, and yachts, as they are all equipped with combustion-type heating appliances, stoves, cooktops, and, in some cases, internal combustion engine-powered generators.

What Is Network Connectivity?

Detectors with this functionality can connect to one another. If one of the detectors detects carbon monoxide, all devices in the network trigger an alarm. This provides a higher level of protection, especially in apartments and houses with multiple rooms.

Example: If the detector in the kitchen detects smoke, the alarms in the bedrooms will go off immediately, even if they’re several floors away.

Isn’t it excessive for the detectors to go off everywhere?

Your life and property are more valuable than the possibility of an alarm waking you up or interrupting your favorite show.

Can I easily turn off the alarm?

Yes, you can silence each detector for 10 minutes by pressing the TEST button. This is enough time to check all rooms for the hazard.

About Smoke

Smoke is one of the greatest threats in a fire—it contains toxic gases that can cause loss of consciousness and suffocation in a matter of seconds. Inhaling smoke is the leading cause of death in fires, so detecting it early is crucial. This allows enough time for a safe evacuation.

Why is it dangerous?

  • Suffocation – Smoke displaces oxygen in the room, leading to a lack of air and loss of consciousness
  • Toxic gases – It contains deadly substances such as carbon monoxide and hydrogen cyanide, which block the transport of oxygen in the blood
  • Reduced visibility – Thick smoke makes it difficult to orient oneself and evacuate during a fire
  • High temperature – Hot smoke can burn the airways and cause serious damage to the lungs

Symptoms of Smoke Inhalation

Smoke Level Description Symptoms
Mild smoke For example, smoke from a candle burning in a closed room. Mild irritation of the eyes, throat, and nose; possible mild cough.
Moderate smoke When there is an active fire in an adjacent room, but not in the room where you are. Difficulty breathing, dizziness, severe eye irritation.
Thick smoke Thick, black smoke, as if from burning furniture or an electrical appliance in the same room. Loss of orientation, severe difficulty breathing, possible loss of consciousness within minutes.

JKD-518-R Maintenance

Gas detectors are factory-calibrated during manufacturing and do not require periodic calibration throughout their lifetime.

Recommended Maintenance:

  1. Cleaning: Clean the housing to ensure that dirt or dust does not block access to the sensors. Depending on the environment, cleaning should be performed once a month to once a week (for very dusty environments);
  2. Battery replacement: Check every 3 years. The battery life of a set of lithium batteries is between 7 and 10 years; after that, they can be replaced.

Other than what is mentioned above, the detector requires no other maintenance.

Additional information
Weight1 kg
Intended Use
Gas DetectionCarbon monoxide (CO), Smoke
Measurement Range
Display
Alarms
Installation Locationceiling, wall
Power Supply
Consumption<50 µA in normal operation, <90 mA when the alarm is activated
Calibration Period
RF connectivity with other detectorsYES
Mobile appNO
Certifications, Standards, and Protection
Contents
Reviews (0)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.