
DINGO T-02 Stationary Breathalyzer for Standalone Testing (for outdoor installation)
768,00 €
The Dingo T-02 is a stationary portal breathalyzer designed for autonomous alcohol testing of workers at the entrance to outdoor work sites. The breathalyzer is equipped with a heat-resistant metal housing that protects it from extreme outdoor temperatures, mechanical damage, and vandalism.
In stock
Dingo T-02 Portal Breathalyzer — designed for mass alcohol testing of employees at the entrance and exit of a facility when testing is conducted outdoors and the device is installed in an open-air location, such as at the facility’s entrance. The Dräger Dingo T-02 can operate at outdoor temperatures as low as -40 degrees.
Dingo T-02 – autonomous breathalyzer for testing
The Dingo T-02 operates completely autonomously, without the need to assign a staff member responsible for alcohol testing. The Dingo T-02 independently controls the opening of a turnstile or the door to a restricted-access facility. It can be easily integrated into existing Access Control Systems (ACS) at the entrance to facilities.
Dingo T-02 provides accurate testing without the use of mouthpieces
Testing is performed by exhaling from a distance or through a straw. There are no consumables costs, or they are extremely low. The perfect breathalyzer for mass testing of employees at the facility entrance.
Rapid testing
With the Dingo T-02, there are no bottlenecks at the factory entrance or exit during mass alcohol testing of workers. The test takes about one second, after which the breathalyzer automatically returns to standby mode for the next test. The Dingo T-02 has a throughput capacity of about 10 people per minute.
Clear Results
The test result is clear and easy to interpret: PASS or FAIL. The decision is entirely objective, made by the breathalyzer, and depends solely on the measured alcohol concentration in the employee’s breath.
The indicator lights are logically arranged and easy to interpret:
- 1 LED for status (STATUS) and
- 2 LEDs for the result: green (PASS) and red (FAIL).
Remote Display
The Dingo T-02 portal breathalyzer features a remote display that duplicates its readings in the security room. The additional audible alarm triggered by a positive alcohol reading ensures that the security guard will be alerted.
Wide Tolerance Limits
With the Dingo T-02, the tolerance level can be set within a range of 0.1 to 0.9 per mille. This allows employers to set wide tolerance limits for alcohol among their employees.
If the measured result is below the tolerance limit (the green PASS LED lights up), the breathalyzer sends an opening signal to the turnstile (the door’s electric lock) to allow the person being tested to pass through.
If alcohol is detected in the breath above the tolerance level (the red “FAIL” LED lights up), the breathalyzer locks the turnstile/door and prevents the intoxicated employee from passing through. In such cases, the standard procedure is for the employee to undergo an additional test with a professional breathalyzer, after which a decision is made regarding admission or disciplinary action.
Durable Housing
The Dingo T-02’s housing is made of steel.
Integration with Access Control Systems
The relays and connectors that control the electric locks and turnstiles can be used to integrate the Dingo T-02 into the Access Control Systems installed at the entrances of facilities, which use card, fingerprint, or other forms of identification.
Computer-Controlled Operation
The Dingo T-02 can be controlled directly from a computer. It allows test results to be recorded in an employee database and provides additional functionality and a high level of security. When testing is conducted using the specialized software, the face of the employee being tested can be photographed, and the photo can be attached to the result in the employee’s file. There is no possibility of fraud! Test results can also be viewed remotely by authorized personnel.
The kit includes:
- Dingo T-02 portable breathalyzer
- Cables for controlling electric locks/turnstiles/access control systems
- Wall mounting brackets
- Remote display with LED indicators and buzzer
- USB cable and CD
- 220/12V power adapter
- installation and operating instructions
For indoor installation, you can choose the Dingo B-02 stationary detector.
| Weight | 4 kg |
|---|---|
| Intended Use | Personnel Control |
| Suitable for | Over 100 employees |
| Sensor Type | Electrochemical |
| Units | Grams per liter, per mille (‰, g/l), Substances found / not found |
| Measurement Range | Indication |
| Accuracy | ± 10% |
| Sample—Type and Method of Collection | Automatically, Manual |
| Mouthpiece Test | NO |
| Test without a mouthpiece | YES |
| Readiness (sec) | 10 |
| Time for Analysis | 3 |
| Power Supply | 12V, 220V |
| Autonomy | No restrictions with continuous power supply |
| Certifications, Standards, and Protection | CE |
| Calibration Period | 6 months |
| Origin | Korea |
Only logged in customers who have purchased this product may leave a review.

Reviews
There are no reviews yet.